HERMS Coils
Our coils are professionally manufactured by a US stainless tubing company, ready for use in your electric brewery setup. The longer 50 foot length ensures that heat transfer is maximized and the large 1/2 inch tubing minimizes flow restriction. Easy to install even in tight kettles due to the cross-over design as having the ends come from the opposite sides of the coil allows for more flex. Attaches to your kettle using compression fittings. Refer to our Hot Liquor Tank build guide for more information on HERMS as well as installation instructions.
Which HERMS coil is right for me?
- STANDARD: For kettles with an inner wall diameter of at least 16" such as 20 gallon Blichmann Boilermaker kettles (or larger).
- SMALL: For kettles with an inner wall diameter of at least 11.75" such as 10 gallon Blichmann Boilermaker kettles or 15 gallon kegs (keggles).
Electric Brewery HERMS Coil, standard size, 15.5" diameter, 7" high
$289.95 USD
Professionally manufactured by a US stainless tubing company using US sourced stainless steel, ready for use in your electric brewery setup. The longer 50 foot length ensures that heat transfer is maximized and the large 1/2 inch tubing minimizes flow...
Electric Brewery HERMS Coil, small size, 11.25" diameter, 9.5" high
$289.95 USD
Professionally manufactured by a US stainless tubing company using US sourced stainless steel, ready for use in your electric brewery setup. The longer 50 foot length ensures that heat transfer is maximized and the large 1/2 inch tubing minimizes flow...
Stainless steel 1/2" compression x 1/2" NPT female fitting
$22.95 USD
1/2" Compression x 1/2" NPT female fitting. Used to attach the HERMS coil to your kettle. 304 Stainless.
Stainless steel 1/2" compression x 1/2" NPT male fitting
$16.95 USD
Used on the Hot Liquor Tank water return. May also be used to attach a HERMS coil to a kettle with female 1/2" NPT couplers. 304 Stainless.
